bsp.c 2.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123
  1. #include "bsp/shark_bsp.h"
  2. #include "bsp/gpio.h"
  3. #include "bsp/uart.h"
  4. #include "bsp/AT24CXX.h"
  5. #include "bsp/shark_rtc.h"
  6. #include "bsp/clock.h"
  7. #include "bsp/fmc_flash.h"
  8. #include "libs/logger.h"
  9. #include "version.h"
  10. #include <string.h>
  11. #if defined CONFIG_BOARD_SP700
  12. const char iap_board_name[] __attribute__((at(0x08002800))) = "SP700";
  13. #elif defined CONFIG_BOARD_SP600
  14. const char iap_board_name[] __attribute__((at(0x08002800))) = "SP600";
  15. #endif
  16. const char iap_fw_version[] __attribute__((at(0x08002A00))) = CONFIG_VERSION;
  17. const char iap_fw_name[] __attribute__((at(0x08002C00))) = "App";
  18. extern void system_clock_config(void);
  19. extern void SystemCoreClockUpdate(void);
  20. extern void gpio_key_init(void);
  21. #define ALARM_TEST 1
  22. #ifndef CONFIG_DEBUG
  23. #define CONFIG_DEBUG 0
  24. #endif
  25. #if 0
  26. void test_fmc_flash(void){
  27. uint8_t data[128];
  28. fmc_erase_image(50 * 1024);
  29. fmc_start_read_image();
  30. for(int i = 0; i < sizeof(data); i++){
  31. data[i] = i;
  32. }
  33. int count = 50;
  34. while(count-- >= 0) {
  35. for(int i = 0; i < sizeof(data); i++){
  36. data[i] = i;
  37. }
  38. fmc_write_image(data, sizeof(data));
  39. memset(data, 0, sizeof(data));
  40. fmc_read_image(data, sizeof(data));
  41. for(int i = 0; i < sizeof(data); i++){
  42. if (data[i] != (uint8_t)i){
  43. sys_debug("");
  44. }
  45. }
  46. }
  47. }
  48. #endif
  49. //all board's low level init is here
  50. void bsp_init(void){
  51. wdog_start(4);
  52. shark_rtc_init();
  53. enable_mcu_power();
  54. system_clock_config(); //after dcdc open, MCU can run on full speed
  55. SystemCoreClockUpdate();
  56. gpio_init();
  57. shark_uart_init(SHARK_UART0);
  58. #if (CONFIG_BOARD_TYPE==SHARK_BOARD_SP700)
  59. shark_uart_init(SHARK_UART1);
  60. #endif
  61. AT24CXX_Init();
  62. AUX_VOL_OPEN(0);
  63. gpio_key_init();
  64. }
  65. void systick_close(void)
  66. {
  67. SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
  68. }
  69. void systick_open(void)
  70. {
  71. SysTick_Config(SystemCoreClock / 1000);
  72. }
  73. char* bsp_get_fversion(void){
  74. return (char *)iap_fw_version;
  75. }
  76. /* timeout:1-25 */
  77. void wdog_start(int timeout){
  78. #if CONFIG_DEBUG == 0
  79. /* enable IRC40K */
  80. rcu_osci_on(RCU_IRC40K);
  81. /* wait till IRC40K is ready */
  82. while(SUCCESS != rcu_osci_stab_wait(RCU_IRC40K)){
  83. }
  84. /* confiure FWDGT counter clock: 40KHz(IRC40K) / 256 = 0.15625 KHz */
  85. fwdgt_config(timeout*40000UL/256, FWDGT_PSC_DIV256);
  86. /* after 4 seconds to generate a reset */
  87. fwdgt_enable();
  88. #endif
  89. }
  90. void wdog_reload(void){
  91. #if CONFIG_DEBUG == 0
  92. fwdgt_counter_reload();
  93. #endif
  94. }
  95. void wdog_set_timeout(int timeout)
  96. {
  97. #if CONFIG_DEBUG == 0
  98. /* enable write access to FWDGT_PSC,and FWDGT_RLD */
  99. FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE;
  100. FWDGT_RLD = RLD_RLD(timeout*40000UL/256);
  101. /* reload the counter */
  102. FWDGT_CTL = FWDGT_KEY_RELOAD;
  103. #endif
  104. }