bms/Application/app/sox/health.h

#ifndef _HEALTH_H__
#define _HEALTH_H__
#include <stdint.h>
#include "bsp/shark_bsp.h"

#define MAX_CURRENT_FOR_CHARGER (30*1000) //最大充电电流20A
#define SIGLE_CELL_MAX_CHARGER_VOLTAGE (3800)//最大允许充电电压，3.9v,考虑到采样的误差取 3.88
#define MAX_CURRENT_FOR_DISCHARGER (120 * 1000) //软件采样的电流保护
/* 
 * xxx_over_temp: 表示过高温(温度过高)
 * xxx_under_temp: 表示过低温(温度过低)
*/
typedef struct {
	uint32_t charger_over_voltage:1;
	uint32_t discharger_lower_voltage:1; //关闭大电流输出
	uint32_t small_current_short:1;
	uint32_t load_current_short:1; //大电短路保护

	uint32_t charger_current:1; //不需要
	uint32_t discharger_current:1;
	uint32_t charger_over_current:1;
	uint32_t discharger_over_current:1;

	uint32_t res1 :1;//ST_TOTAL_CHRG
	uint32_t charger_cells_vol_diff_over:1; //充电cell的电压差异超过阈值
	uint32_t power_save:1;
	uint32_t powerdown_lower_voltage:1;

	uint32_t charger_lower_temp:1;
	uint32_t discharger_lower_temp:1;
	uint32_t charger_over_temp:1;
	uint32_t discharger_over_temp:1;

	uint32_t sigle_cell_lower_voltage:1; //关闭大电流输出
	uint32_t sigle_cell_over_voltage:1;

	uint32_t discharger_shutpower_voltage:1; //关闭动力
	uint32_t discharger_cell_shutpower_voltage:1; //关闭动力
	
	uint32_t is_work_temp_normal:1;

	uint32_t lower_temp_deny_charger:1;
	uint32_t lower_temp_deny_discharger:1;
	uint32_t over_temp_deny_charger:1;
	uint32_t over_temp_deny_discharger:1;

	
	uint32_t res2:11;
	uint8_t    internal_resistance[CELLS_NUM];   //cell's internal resistance
}bms_health_t;

bms_health_t *bms_health(void);
void health_init(void);
void check_current_state(void);
void check_voltage_state(void);
void check_temp_state(void);
void health_process_aux_lock(void);
void health_stop_aux_detect(void);
uint32_t bms_health_pack_lower_voltage(void);
uint32_t bms_health_cell_lower_voltage(void);

#endif /* _HEALTH_H__ */