#pragma once

#define SHARK_BOARD_SP600	1
#define SHARK_BOARD_SP700	2
#define SHARK_BOARD_SP600_15AH 3

#define SHARK_BOARD_SP700_OLD_CS1180 1

#define true				TRUE
#define false				FALSE

#ifdef CONFIG_BOARD_SP600
#include "gd32f3x0.h"
#define CONFIG_BOARD_TYPE	SHARK_BOARD_SP600
#elif defined(CONFIG_BOARD_SP700)
#include "gd32f3x0.h"
#define CONFIG_BOARD_TYPE	SHARK_BOARD_SP700
#elif defined(CONFIG_BOARD_SP600_15AH)
#include "gd32f3x0.h"
#define CONFIG_BOARD_TYPE	SHARK_BOARD_SP600_15AH

#else
#error "Invalid Board"
#endif

#if (CONFIG_BOARD_TYPE==SHARK_BOARD_SP700)
#define r_resistor 1.0f // 1ΊΑΕ·
#define MAX_HA (30.0f)
#define MAX_SOFT_CURRENT (50)
#define MAX_I2T  (2500.0f * 2)
#define UART_NUM 2
#define CURRENT_BIGER 50000
#define CURRENT_MID   40000
#define CURRENT_NORMAL 30000
#elif (CONFIG_BOARD_TYPE==SHARK_BOARD_SP600)
#define r_resistor 2.0f
#ifdef CONFIG_CAP_15AH
#define MAX_HA (15.0f)
#define CURRENT_BIGER 35000
#define CURRENT_MID   20000
#define CURRENT_NORMAL 15000
#else
#define MAX_HA (22.5f)
#define CURRENT_BIGER 40000
#define CURRENT_MID   30000
#define CURRENT_NORMAL 20000
#endif
#define MAX_SOFT_CURRENT (25)
#define MAX_I2T  (900.0f * 2)
#define UART_NUM 1
#endif

#define MIN_CURRENT_FOR_CS1180 (4000)

#define SMALL_CURRENT_R (28.0f)

#define CELLS_NUM 15
#define PACK_TEMPS_NUM 4
#define PCB_TEMP_INDEX 3
#define GD32_ADC 0
#define CS1180_ADC 1

#define UART_TIMEOUT 3000
#define CHARGER_DETECT_IRQ_CLEAR_TIMEOUT (UART_TIMEOUT + 2 * 1000)

void bsp_init(void);
void wdog_start(int timeout);
void wdog_reload(void);
int  wdog_set_timeout(int timeout);
void systick_close(void);
void systick_open(void);