过温保护，PCB的温度增大到75度保护，低于70度恢复

Signed-off-by: huhui <huhui@sharkgulf.com>

Application/app/sox/health.c

@@ -16,14 +16,14 @@
 #endif
 
 static int8_t charger_normal_low_temp[PACK_TEMPS_NUM] = {0,0,0,-5}; //正常的充电最低温度
-static int8_t charger_normal_high_temp[PACK_TEMPS_NUM] = {50,50,50,55}; //正常的充电最高温度
+static int8_t charger_normal_high_temp[PACK_TEMPS_NUM] = {50,50,50,70}; //正常的充电最高温度
 static int8_t charger_lower_low_temp[PACK_TEMPS_NUM] = {-1,-1,-1,-6}; //需要停止充电的最低温度
-static int8_t charger_higher_high_temp[PACK_TEMPS_NUM] = {55,55,55,60}; //需要停止充电的最高温度
+static int8_t charger_higher_high_temp[PACK_TEMPS_NUM] = {55,55,55,75}; //需要停止充电的最高温度
 
 static int8_t discharger_normal_low_temp[PACK_TEMPS_NUM] = {-20,-20,-20,-25};//正常的放电最低温度
-static int8_t discharger_normal_high_temp[PACK_TEMPS_NUM] = {50,50,50,55};//正常的放电最高温度
+static int8_t discharger_normal_high_temp[PACK_TEMPS_NUM] = {50,50,50,70};//正常的放电最高温度
 static int8_t discharger_lower_low_temp[PACK_TEMPS_NUM] = {-25,-25,-25,-30}; //需要停止放电的最低温度
-static int8_t discharger_higher_high_temp[PACK_TEMPS_NUM] = {55,55,55,60};//需要停止放电的最高温度
+static int8_t discharger_higher_high_temp[PACK_TEMPS_NUM] = {55,55,55,75};//需要停止放电的最高温度
 static int8_t work_lower_temp[PACK_TEMPS_NUM - 1] = {0,0,0}; //pcb温度不用判断
 /*定义低温和正常温度下的电池保护参数, [0]低温参数, [1]常温参数 */
 /*能提供动力的最小电压*/