MC100/Applications/bsp/board_mc_v1.h

#ifndef _BOARD_MC_V1_H__
#define _BOARD_MC_V1_H__
#if defined (GD32F30X_HD) || defined (GD32F30X_XD) || defined (GD32F30X_CL)
#include "gd32f30x.h"
#elif defined GD32E10x
#include "gd32e10x.h"
#endif

#define SCHED_TIMER TIMER5
#define SCHED_TIMER_RCU RCU_TIMER5
#define SCHED_TIMER_IRQ TIMER5_IRQn
#define SCHED_TIMER_IRQHandler TIMER5_IRQHandler

#define PWM_DEAD_TIME_NS 200u
#define HW_DEAD_TIME_NS  200u
#define HW_RISE_TIME_NS  500u
#define HW_NOISE_TIME_NS 300u

#define TDead NS_2_TCLK(HW_DEAD_TIME_NS + PWM_DEAD_TIME_NS)/* ����ʱ�� */ 
#define TRise NS_2_TCLK(HW_RISE_TIME_NS)/* MOS ����ʱ��*/
#define TNoise NS_2_TCLK(HW_NOISE_TIME_NS)/* MOS��������Ŀ�������ʱ�� */
#define TADC  ((uint16_t)((ADC_TRIG_CONV_LATENCY_CYCLES + ADC_SAMPLING_CYCLES*8) * TIM_CLOCK_MHz) / ADC_CLOCK_MHz + 1u)/* ADC ����ʱ�� */
#define TSampleMIN (TDead + TRise + TADC) //采样需要的总时间
#define TSampleBefore (TDead + TRise) //采样开始前需要等待的时间

#define ADC_REFERENCE_VOLTAGE  (3.3F)

/* MOS驱动 */
#define pwm_timer TIMER0
#define PWM_MODE TIMER_OC_MODE_PWM1
#define PWM_U_P_GROUP 	GPIOA
#define PWM_U_P_PIN 	GPIO_PIN_8
#define PWM_U_P_RCU 	RCU_GPIOA
#define PWM_U_P_MODE 	GPIO_MODE_AF_PP

#define PWM_U_N_GROUP 	GPIOB
#define PWM_U_N_PIN 	GPIO_PIN_13
#define PWM_U_N_RCU 	RCU_GPIOB
#define PWM_U_N_MODE 	GPIO_MODE_AF_PP

#define PWM_V_P_GROUP 	GPIOA
#define PWM_V_P_PIN 	GPIO_PIN_9
#define PWM_V_P_RCU 	RCU_GPIOA
#define PWM_V_P_MODE 	GPIO_MODE_AF_PP

#define PWM_V_N_GROUP 	GPIOB
#define PWM_V_N_PIN 	GPIO_PIN_14
#define PWM_V_N_RCU 	RCU_GPIOB
#define PWM_V_N_MODE 	GPIO_MODE_AF_PP

#define PWM_W_P_GROUP 	GPIOA
#define PWM_W_P_PIN 	GPIO_PIN_10
#define PWM_W_P_RCU 	RCU_GPIOA
#define PWM_W_P_MODE 	GPIO_MODE_AF_PP

#define PWM_W_N_GROUP 	GPIOB
#define PWM_W_N_PIN 	GPIO_PIN_15
#define PWM_W_N_RCU 	RCU_GPIOB
#define PWM_W_N_MODE 	GPIO_MODE_AF_PP

#define PWM_BRAKE_GROUP 	GPIOB
#define PWM_BRAKE_PIN 	GPIO_PIN_12
#define PWM_BRAKE_RCU 	RCU_GPIOB
#define PWM_BRAKE_MODE 	GPIO_MODE_IN_FLOATING


/* 高边电流传感器采样 */
#define HIGH_SIDE_CURRENT_SENSOR

#define V_PHASE_I_CHAN  ADC_CHANNEL_5
#define W_PHASE_I_CHAN  ADC_CHANNEL_6

#define PWM_UV_SWAP

#define V_PHASE_ADC_GROUP 	GPIOA
#define V_PHASE_ADC_PIN 	GPIO_PIN_5
#define V_PHASE_ADC_RCU 	RCU_GPIOA
#define V_PHASE_ADC_MODE 	GPIO_MODE_AIN

#define W_PHASE_ADC_GROUP 	GPIOA
#define W_PHASE_ADC_PIN 	GPIO_PIN_6
#define W_PHASE_ADC_RCU 	RCU_GPIOA
#define W_PHASE_ADC_MODE 	GPIO_MODE_AIN


/* 温度，母线，油门等采集*/
#define MOTOR_TEMP_CHAN ADC_CHANNEL_0

#define VBUS_V_CHAN 		ADC_CHANNEL_7
#define VBUS_V_ADC_GROUP 	GPIOA
#define VBUS_V_ADC_PIN 		GPIO_PIN_7
#define VBUS_V_ADC_RCU 		RCU_GPIOA
#define VBUS_V_ADC_MODE 	GPIO_MODE_AIN

/* 是否有目前电流采集 */
#define NO_SAMPLE_IDC //如果硬件没有采集母线电流，定义一下

/*
#define THROTTLE_CHAN ADC_CHANNEL_1 //转把信号
#define THROTTLE_V_ADC_GROUP 	GPIOA
#define THROTTLE_V_ADC_PIN 		GPIO_PIN_1
#define THROTTLE_V_ADC_RCU 		RCU_GPIOA
#define THROTTLE_V_ADC_MODE 	GPIO_MODE_AIN
*/

#define ADC_TO_CURR_ceof1 (0.3362f)
#define ADC_TO_CURR_ceof2 (0.3404f)

#define VBUS_VOL_CEOF (ADC_REFERENCE_VOLTAGE*45/4096.0f)
#define THROTTLE_VOL_CEOF (1)

/* 刹车手把输入 */
//#define GPIO_BRAKE_IN_GROUP 	GPIOA
#define GPIO_BRAKE_IN_PIN 	GPIO_PIN_2
#define GPIO_BRAKE_IN_RCU 	RCU_GPIOA
#define GPIO_BRAKE_IN_MODE 	GPIO_MODE_IN_FLOATING
#define GPIO_BRAKE_IRQ  EXTI2_IRQn
#define GPIO_BRAKE_EXTI EXTI_2
#define GPIO_BRAKE_EXIT_SRC_GROUP GPIO_PORT_SOURCE_GPIOA
#define GPIO_BRAKE_EXIT_SRC_PIN GPIO_PIN_SOURCE_2


/* 是否用编码器 */
#define USE_ENCODER_ABI

/* 编码器 */
#define ENC_A_GROUP GPIOB
#define ENC_A_PIN GPIO_PIN_4
#define ENC_A_RCU RCU_GPIOB
#define ENC_A_MODE GPIO_MODE_IN_FLOATING

#define ENC_B_GROUP GPIOB
#define ENC_B_PIN GPIO_PIN_5
#define ENC_B_RCU RCU_GPIOB
#define ENC_B_MODE GPIO_MODE_IN_FLOATING

#define TIMER2_PB4_PB5_REMAP GPIO_TIMER2_PARTIAL_REMAP

#define ENC_PWM_GROUP GPIOA
#define ENC_PWM_PIN GPIO_PIN_15
#define ENC_PWM_RCU RCU_GPIOA
#define ENC_PWM_MODE GPIO_MODE_IN_FLOATING
#define TIMER1_PA15_REMAP GPIO_TIMER1_PARTIAL_REMAP0

#define ENC_I_GROUP GPIOB     /*测量编码器的ABI的I信号，360度同步一次*/
#define ENC_I_PIN GPIO_PIN_8
#define ENC_I_RCU RCU_GPIOB
#define ENC_I_MODE GPIO_MODE_IPU
#define ENC_I_IRQ  EXTI5_9_IRQn
#define ENC_I_EXTI EXTI_8
#define ENC_I_EXIT_SRC_GROUP GPIO_PORT_SOURCE_GPIOB
#define ENC_I_EXIT_SRC_PIN GPIO_PIN_SOURCE_8

#define ENC_TIMER TIMER2  /* 测量编码器的ABI信号的AB信号 */
#define ENC_TIMER_RCU RCU_TIMER2
#define ENC_TIMER_IRQ TIMER2_IRQn
#define ENC_TIMER_IRQHandler TIMER2_IRQHandler

#define ENC_PWM_TIMER TIMER1    /* 测量绝对编码器PWM输出的占空比，获取转子angle*/
#define ENC_PWM_TIMER_RCU RCU_TIMER1
#define ENC_PWM_TIMER_IRQ TIMER1_IRQn
#define ENC_PWM_TIMER_CHAN  TIMER_CH_0
#define ENC_PWM_TIMER_IRQ_CH TIMER_INT_CH0
#define ENC_PWM_TIMER_INT_FLG TIMER_INT_FLAG_CH0
#define ENC_PWM_IRQHandler TIMER1_IRQHandler

#define ENC_MAX_interpolation 4.0F

#define ENC_FILTER_NR          20

/* 编码器参数      */
#define ENC_MAX_RES  1024
#define ENC_PWM_Min_P (1.0f/131.0f)

#define ENC_Duty_2_Pluse_Nr(duty) (duty * ENC_MAX_RES) //通过占空比计算有几个脉冲
#define ENC_Pluse_Nr_2_angle(Nr) (360.0f/(float)ENC_MAX_RES * (Nr))

#define ENC_Duty(d, t) ((1.0f/128.0f) * (130.0f * (d)/(t) - 1.0f))


#define DEBUG_PORT_UART1

#endif /*_BOARD_MC_V1_H__ */