MC100/Applications/bsp/pwm.c

#include "bsp/bsp.h"
#include "bsp/pwm.h"
#include "bsp/adc.h"
#include "os/os_task.h"
/*
以下主要是在某一相电路无法采集的时候，需要对这相的pwm挖坑处理
timer 分配:
timer0 -> ch0-2 互补pwm
        ch4 event, update event 触发DMA(ch3,4)实现CCR的自更新
timer1 -> 触发ADC采样，GD32不支持多channel 或方式触发输出，通过timer1的 ch0 compara 配置 TRGO触发ADC，但是需要在一个PWM周期内触发2次（单电阻）
timer0 master --> timer1 slave/master 确保timer0，1同步开始，同频同相位

DMA 分配：
DMA0 ch4 -> timer0 update event
    ch3 -> timer0 chan3 CC event

    ch1 -> timer1 update event，需要更新CCR
*/

static void _init_pwm_timer(void);
#ifdef ENABLE_AUX_TIMER
static void _init_adc_timer(void);
static void _init_aux_timer(void);
#endif
#if SHUNT_NUM==ONE_SHUNT_SAMPLE
static void timer0_dma_config(void);
#endif
static void _pwm_gpio_config(void);
#if USER_ITMER_BRAKE==0
static void _gpio_brakein_irq_enable(void);
#endif
u16 timer_update_buffer[6] = {0};

void pwm_3phase_init(void){
    _init_pwm_timer();
#ifdef ENABLE_AUX_TIMER
	_init_adc_timer();
	_init_aux_timer();
#endif	
#if SHUNT_NUM==ONE_SHUNT_SAMPLE	
	timer0_dma_config();
#endif	
	_pwm_gpio_config();
}

static rcu_periph_enum _rcu_clk(u32 timer) {
    if (timer == TIMER0) {
        return RCU_TIMER0;
    }
    if (timer == TIMER1) {
        return RCU_TIMER1;
    }
    if (timer == TIMER2) {
        return RCU_TIMER2;
    }
    return RCU_TIMER2;      
}

static void _pwm_gpio_config(void)
{
    rcu_periph_clock_enable(RCU_GPIOA);
    rcu_periph_clock_enable(RCU_GPIOB);
    rcu_periph_clock_enable(RCU_AF);
	//gpio_pin_remap_config(GPIO_TIMER0_PARTIAL_REMAP, ENABLE);
	//gpio_pin_remap_config(GPIO_TIMER0_FULL_REMAP, DISABLE);
    /*configure PA8 PA9 PA10(TIMER0 CH0 CH1 CH2) as alternate function*/
    gpio_init(GPIOA,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_8);
    gpio_init(GPIOA,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_9);
    gpio_init(GPIOA,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_10);

    /*configure PB13 PB14 PB15(TIMER0 CH0N CH1N CH2N) as alternate function*/
    gpio_init(GPIOB,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_13);
    gpio_init(GPIOB,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_14);
    gpio_init(GPIOB,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_15);
	/*configure BRAKE IN*/
#if USER_ITMER_BRAKE==1
#ifdef GD32_FOC_DEMO
    /* TIMER0 BKIN */
    gpio_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_12);
#else
	gpio_init(GPIOA,GPIO_MODE_AF_PP,GPIO_OSPEED_50MHZ,GPIO_PIN_6);
#endif
#else
	gpio_init(GPIOB,GPIO_MODE_IN_FLOATING,GPIO_OSPEED_50MHZ,GPIO_PIN_4);//高刹车
	gpio_init(GPIOB,GPIO_MODE_IN_FLOATING,GPIO_OSPEED_50MHZ,GPIO_PIN_5);//低刹车
#endif
#ifdef GD32_FOC_DEMO
	/* IR2136S enable pin */
	gpio_bit_reset(GPIOA, GPIO_PIN_12);
    gpio_init(GPIOA, GPIO_MODE_OUT_PP, GPIO_OSPEED_2MHZ, GPIO_PIN_12);
#endif
}


static void _init_pwm_timer(void) {
	timer_oc_parameter_struct timer_ocintpara;
	timer_parameter_struct timer_initpara;
	
	u32 timer = pwm_timer;
	u32 half_period = FOC_PWM_Half_Period;
	rcu_periph_clock_enable(_rcu_clk(timer));

	timer_deinit(timer);

    /* TIMER0 configuration */
	memset(&timer_initpara, 0, sizeof(timer_initpara));
	memset(&timer_ocintpara, 0, sizeof(timer_ocintpara));
    timer_initpara.prescaler        = 0;
    timer_initpara.alignedmode      = TIMER_COUNTER_CENTER_UP;
	timer_initpara.counterdirection  = TIMER_COUNTER_UP;
    timer_initpara.period          = half_period-1;
    timer_initpara.clockdivision    = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 1;
    timer_init(timer,&timer_initpara);
    /* auto-reload preload enable */
    timer_auto_reload_shadow_enable(timer);

    /* CH1,CH2 and CH3 configuration in PWM mode */
    timer_ocintpara.outputstate  = TIMER_CCX_ENABLE;
    timer_ocintpara.outputnstate = TIMER_CCXN_ENABLE;
    timer_ocintpara.ocpolarity   = TIMER_OC_POLARITY_LOW;
    timer_ocintpara.ocnpolarity  = TIMER_OCN_POLARITY_LOW;
    timer_ocintpara.ocidlestate  = TIMER_OC_IDLE_STATE_HIGH;
    timer_ocintpara.ocnidlestate = TIMER_OCN_IDLE_STATE_HIGH;

    timer_channel_output_config(timer,TIMER_CH_0,&timer_ocintpara);
    timer_channel_output_pulse_value_config(timer,TIMER_CH_0,half_period/2);
    timer_channel_output_mode_config(timer,TIMER_CH_0,TIMER_OC_MODE_PWM0);
    timer_channel_output_shadow_config(timer,TIMER_CH_0,TIMER_OC_SHADOW_ENABLE);

    timer_channel_output_config(timer,TIMER_CH_1,&timer_ocintpara);
    timer_channel_output_pulse_value_config(timer,TIMER_CH_1,half_period/2);
    timer_channel_output_mode_config(timer,TIMER_CH_1,TIMER_OC_MODE_PWM0);
    timer_channel_output_shadow_config(timer,TIMER_CH_1,TIMER_OC_SHADOW_ENABLE);

    timer_channel_output_config(timer,TIMER_CH_2,&timer_ocintpara);
    timer_channel_output_pulse_value_config(timer,TIMER_CH_2,half_period/2);
    timer_channel_output_mode_config(timer,TIMER_CH_2,TIMER_OC_MODE_PWM0);
    timer_channel_output_shadow_config(timer,TIMER_CH_2,TIMER_OC_SHADOW_ENABLE);
    
    timer_ocintpara.outputstate  = TIMER_CCX_ENABLE;
    timer_ocintpara.outputnstate = TIMER_CCXN_DISABLE;
    timer_ocintpara.ocpolarity   = TIMER_OC_POLARITY_HIGH;
	timer_ocintpara.ocnpolarity  = TIMER_OCN_POLARITY_HIGH;
    timer_ocintpara.ocidlestate  = TIMER_OC_IDLE_STATE_LOW;
    timer_ocintpara.ocnidlestate = TIMER_OCN_IDLE_STATE_LOW;

    /* chan3 trigger adc O3CPRE is alwary active high, adc trigger is rising */
    timer_channel_output_config(timer,TIMER_CH_3,&timer_ocintpara);
    timer_channel_output_pulse_value_config(timer,TIMER_CH_3,half_period-5);
    timer_channel_output_mode_config(timer,TIMER_CH_3,TIMER_OC_MODE_PWM1);
    timer_channel_output_shadow_config(timer,TIMER_CH_3,TIMER_OC_SHADOW_ENABLE);

#if USER_ITMER_BRAKE==1
	timer_break_parameter_struct timer_breakpara;
    timer_breakpara.runoffstate        = TIMER_ROS_STATE_DISABLE;
    timer_breakpara.ideloffstate       = TIMER_ROS_STATE_DISABLE;
    timer_breakpara.protectmode        = TIMER_CCHP_PROT_OFF; 
    timer_breakpara.deadtime           = 0;//NS_2_TCLK(TIMER_DT_NS);
    timer_breakpara.breakstate         = TIMER_BREAK_DISABLE;
    timer_breakpara.breakpolarity      = TIMER_BREAK_POLARITY_HIGH;
    timer_breakpara.outputautostate    = TIMER_OUTAUTO_DISABLE;
    timer_break_config(timer,&timer_breakpara);
	timer_interrupt_enable(timer, TIMER_INT_BRK);
	timer_interrupt_flag_clear(timer, TIMER_INT_FLAG_BRK);
	nvic_irq_enable(TIMER0_BRK_IRQn, 1, 0);		
#else
	_gpio_brakein_irq_enable();
#endif

#ifdef ENABLE_AUX_TIMER
	/* select the master slave mode */
	timer_master_slave_mode_config(timer,TIMER_MASTER_SLAVE_MODE_ENABLE);
	/* slave mode selection: enabled when time2 is enable*/
	timer_slave_mode_select(timer,TIMER_SLAVE_MODE_EVENT);
	timer_input_trigger_source_select(timer,TIMER_SMCFG_TRGSEL_ITI2);
#endif
#if SHUNT_NUM==ONE_SHUNT_SAMPLE
	timer_channel_output_shadow_config(timer,TIMER_CH_0,TIMER_OC_SHADOW_DISABLE);
	timer_channel_output_shadow_config(timer,TIMER_CH_1,TIMER_OC_SHADOW_DISABLE);
	timer_channel_output_shadow_config(timer,TIMER_CH_2,TIMER_OC_SHADOW_DISABLE);
	
	timer_dma_transfer_config(TIMER0, TIMER_DMACFG_DMATA_CH0CV, TIMER_DMACFG_DMATC_3TRANSFER);
	timer_dma_enable(TIMER0, TIMER_DMA_UPD);
#else
	timer_master_slave_mode_config(timer,TIMER_MASTER_SLAVE_MODE_DISABLE);
#endif /* ONE_SHUNT_SAMPLE_1 */

	pwm_enable_channel();

	timer_interrupt_disable(timer, TIMER_INT_UP);
	timer_interrupt_flag_clear(timer, TIMER_INT_FLAG_UP);
	nvic_irq_enable(TIMER0_UP_IRQn, TIMER_UP_IRQ_PRIORITY, 0);	
#if SHUNT_NUM==THREE_SHUNTS_SAMPLE	
    timer_enable(timer);
#endif

#ifdef GD32_FOC_DEMO
	/* IR2136S enable */
    gpio_ir2136_enable(true);
#endif

}

#ifdef ENABLE_AUX_TIMER
static void _init_adc_timer(void) {
    timer_oc_parameter_struct timer_ocintpara;
    timer_parameter_struct timer_initpara;
    u32 timer = adc_timer;
    u32 half_period = FOC_PWM_Half_Period;

    rcu_periph_clock_enable(_rcu_clk(timer));

    timer_deinit(timer);
	memset(&timer_initpara, 0, sizeof(timer_initpara));
	memset(&timer_ocintpara, 0, sizeof(timer_ocintpara));

    timer_initpara.prescaler        = 0;
    timer_initpara.alignedmode      = TIMER_COUNTER_CENTER_UP;
    timer_initpara.period          = half_period;
    timer_initpara.clockdivision    = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 0;
    timer_init(timer,&timer_initpara);

    timer_ocintpara.outputstate  = TIMER_CCX_ENABLE;
    timer_ocintpara.outputnstate = TIMER_CCXN_DISABLE;
    timer_ocintpara.ocpolarity   = TIMER_OC_POLARITY_HIGH;
	timer_ocintpara.ocnpolarity  = TIMER_OCN_POLARITY_HIGH;
    timer_ocintpara.ocidlestate  = TIMER_OC_IDLE_STATE_LOW;
    timer_ocintpara.ocnidlestate = TIMER_OCN_IDLE_STATE_LOW;

    timer_channel_output_config(timer,TIMER_CH_0,&timer_ocintpara);

    timer_channel_output_pulse_value_config(timer,TIMER_CH_0,half_period-1);
#if SHUNT_NUM==ONE_SHUNT_SAMPLE	
    timer_channel_output_mode_config(timer,TIMER_CH_0,TIMER_OC_MODE_PWM1);
#else
	timer_channel_output_mode_config(timer,TIMER_CH_0,TIMER_OC_MODE_PWM0);
#endif
    timer_channel_output_shadow_config(timer,TIMER_CH_0,TIMER_OC_SHADOW_ENABLE);

    /* select the master slave mode */
    timer_master_slave_mode_config(timer,TIMER_MASTER_SLAVE_MODE_ENABLE);
    /* slave mode selection: enabled when time2 is enable*/
    timer_slave_mode_select(timer,TIMER_SLAVE_MODE_EVENT);
    timer_input_trigger_source_select(timer,TIMER_SMCFG_TRGSEL_ITI2);
	
    //timer_primary_output_config(timer,ENABLE);

    /* auto-reload preload enable */
    timer_auto_reload_shadow_enable(timer);
	
    //timer_enable(timer);
}

static void _init_aux_timer(void) {
    timer_parameter_struct timer_initpara;
    u32 timer = aux_timer;
    rcu_periph_clock_enable(_rcu_clk(timer));

    timer_deinit(timer);
	memset(&timer_initpara, 0, sizeof(timer_initpara));

    timer_initpara.prescaler        = 0;
    timer_initpara.alignedmode      = TIMER_COUNTER_CENTER_UP;
    timer_initpara.period          = FOC_PWM_period;
    timer_initpara.clockdivision    = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 0;

    timer_init(timer,&timer_initpara);

    /* select the master slave mode */
    timer_master_slave_mode_config(timer,TIMER_MASTER_SLAVE_MODE_ENABLE);
    /* timer update event is used as trigger output */
    timer_master_output_trigger_source_select(timer,TIMER_TRI_OUT_SRC_ENABLE);

	timer_primary_output_config(timer,ENABLE);

	timer_enable(timer);
}

#endif

#if SHUNT_NUM==ONE_SHUNT_SAMPLE
static void timer0_dma_config(void)
{
    dma_parameter_struct dma_init_struct;
    rcu_periph_clock_enable(RCU_DMA0);

    /* TIMER0 update */
    dma_deinit(DMA0, DMA_CH4);
    dma_init_struct.direction    = DMA_MEMORY_TO_PERIPHERAL;
    dma_init_struct.memory_addr  = (uint32_t)timer_update_buffer;
    dma_init_struct.memory_inc   = DMA_MEMORY_INCREASE_ENABLE;
    dma_init_struct.memory_width = DMA_MEMORY_WIDTH_16BIT;
    dma_init_struct.number       = 6;
    dma_init_struct.periph_addr  = (uint32_t)0x40012C4C;
    dma_init_struct.periph_inc   = DMA_PERIPH_INCREASE_DISABLE;
    dma_init_struct.periph_width = DMA_PERIPHERAL_WIDTH_16BIT;
    dma_init_struct.priority     = DMA_PRIORITY_ULTRA_HIGH;
    dma_init(DMA0, DMA_CH4, &dma_init_struct);
    dma_circulation_enable(DMA0, DMA_CH4);
    dma_memory_to_memory_disable(DMA0, DMA_CH4);
}
#endif

#if USER_ITMER_BRAKE==0
static void _gpio_brakein_irq_enable(void){
	gpio_exti_source_select(GPIO_PORT_SOURCE_GPIOB, GPIO_PIN_SOURCE_4);
	exti_init(EXTI_4, EXTI_INTERRUPT, EXTI_TRIG_BOTH);
	nvic_irq_enable(EXTI4_IRQn, 4U, 0U);
	exti_interrupt_flag_clear(EXTI_4);
	exti_interrupt_enable(EXTI_4);

	gpio_exti_source_select(GPIO_PORT_SOURCE_GPIOB, GPIO_PIN_SOURCE_5);
	exti_init(EXTI_5, EXTI_INTERRUPT, EXTI_TRIG_BOTH);
	nvic_irq_enable(EXTI5_9_IRQn, 4U, 0U);
	exti_interrupt_flag_clear(EXTI_5);
	exti_interrupt_enable(EXTI_5);	
}
#endif

void pwm_start(void){
	pwm_update_duty(FOC_PWM_Half_Period/2, FOC_PWM_Half_Period/2, FOC_PWM_Half_Period/2);
	pwm_update_2smaples(FOC_PWM_Half_Period-10, FOC_PWM_Half_Period + 1);
	/* wait for a new PWM period to flush last HF task */
	timer_flag_clear(pwm_timer, TIMER_FLAG_UP);

	timer_event_software_generate(pwm_timer, TIMER_EVENT_SRC_UPG);
	while ( timer_flag_get(pwm_timer, TIMER_FLAG_UP) == RESET ){}
	/* Clear Update Flag */
	timer_flag_clear(pwm_timer, TIMER_FLAG_UP);

	timer_primary_output_config(pwm_timer,ENABLE);
#ifdef ENABLE_AUX_TIMER	
	timer_primary_output_config(adc_timer,ENABLE);
#endif
	timer_flag_clear(pwm_timer, TIMER_FLAG_UP);
	timer_interrupt_enable(pwm_timer, TIMER_INT_UP);
}

void pwm_stop(void){
	timer_primary_output_config(pwm_timer,DISABLE);
#ifdef ENABLE_AUX_TIMER	
	timer_primary_output_config(adc_timer,DISABLE);
#endif
	timer_interrupt_disable(pwm_timer, TIMER_INT_UP);
	/* wait for a new PWM period to flush last HF task */
	timer_flag_clear(pwm_timer, TIMER_FLAG_UP);
	//while ( timer_flag_get(pwm_timer, TIMER_FLAG_UP) == RESET ){}
	/* Clear Update Flag */
	timer_flag_clear(pwm_timer, TIMER_FLAG_UP);
}

void pwm_enable_output(bool enable) {
	if (enable) {
		timer_primary_output_config(pwm_timer,ENABLE);
	}else {
		timer_primary_output_config(pwm_timer,DISABLE);
	}
}

/*open low side of the mosfet*/
void pwm_turn_on_low_side(void)
{
	pwm_update_duty(0, 0, 0);
	pwm_update_2smaples(FOC_PWM_Half_Period-1, FOC_PWM_Half_Period + 1);
	timer_flag_clear(pwm_timer,TIMER_FLAG_UP);
	timer_event_software_generate(pwm_timer, TIMER_EVENT_SRC_UPG);
  	while (timer_flag_get(pwm_timer,TIMER_FLAG_UP) == RESET );
  	/* Main PWM Output Enable */
  	timer_primary_output_config(pwm_timer, ENABLE);
#ifdef ENABLE_AUX_TIMER	
	timer_primary_output_config(adc_timer, ENABLE);
#endif
}

void pwm_update_sample(u32 samp1, u32 samp2, u8 sector) {
	pwm_update_2smaples(samp1, samp2);
#ifdef ENABLE_AUX_TIMER
	if (samp1 < FOC_PWM_Half_Period) {
		adc_update_ext_trigger(ADC_TRIGGER_PHASE);
	}else {
		adc_update_ext_trigger(ADC_TRIGGER_PHASE2);
	}
#endif	
	adc_current_sample_config(sector);
}